Instant Phone System Support Line 0845 5088 321
We have simple packages availble for you. please click here to buy
- 1 Hour support £40
- 2 Hours support £60
- 3 Hours support £100
- Remote install from £120
Telephone System Remote Support is a service provided by our Qualified Engineers. Our engineer can access your Phone System remotely and fix or configure your phone system. We support the following Phone Systems for Remote Support. Also we offer a complete remote install any where in the country, which will save you engineering cost for onsite.
- Nortel BCM 50 Realse 1 to 6
- Nortel BCM 200 3.6 to 6
- Nortel BCM 400 Relase 3.6 to 6
- Nortel BCM 450
- Nortel BCM 450 Rel 5 and 6
- All versions of BT Versatility
Nortel BCM Interoperability SIP
In this example, I set up a Trixbox (192.168.100.252) to a BCM400 (192.168.100.253) using SIP.
BCM400 setup:
i2004 phone connected as Ext3100
License – VoIP 2 Trunk (allows SIP and H323 trunks)
IP: 192.168.100.252
TrixBox
Verson 2.2 running on VMwareServer 1.0.3
Ip address 192.168.100.253
One Xlite SIP client connected as EXT4556
- PABX Configurations**
- Trixbox
Trixbox SIP Trunk:
Outbound Caller ID: 4500
Dial Rules: 31XX
Outbound Peer Details:
trunkname: BCM400-SIP
host=192.168.100.253
type=peer
No incomming or registration settings.
Trixbox Route Setup:
Routename: BCM400
DialPattern: 31XX
Trunk: BCM400-SIP
BCM Configuration:
Resources/telephony resources/Ip trunks
Routing Table
name: Trix
Destination Digits: 5
Destination IP: 192.168.100.252
GW Type = Other
GW Protocol = None
VoIP Protocol = SIP
Telephony/Dialing Plan/Routing/Routes
Route: 004
Use Pool: BlocA
Telephone/Dialing Plan/Routing/Destination Codes
Destination code: 4
Normal Route: 004
Absorbed Length: all
Your IP Address is:
38.107.179.231