If you have a tomtom 6 software for PDA’s then the following is the compatiblity informattion.
The following devices are compatible with NAVIGATOR 6:
| Brand | Model |
| Acer | n310, n311, n35, n50 |
| Asus | Mypal A632N, Mypal A636N |
| Dell | Axim X51, X51V |
| Eten | M600, G500 |
| Fujitsu Siemens | Pocket LOOX 720, Pocket LOOX N520 |
| HP | HW6510, HW6515, iPAQ H4150, iPAQ H4350, iPAQ HW6910, iPAQ HW6915, iPAQ HX2190, iPAQ HX2490, iPAQ RX1950, iPAQ RZ1710 |
| HTC | P3600 |
| Imate | JAM, Jamin, PDA2K, PDA-N |
| Mitac | Mio 168, Mio A201, Mio A701, Mio P350, Mio P550 |
| Nokia | E50, E61, N73, N80 |
| O2 | XDA Exec, XDA Orbit |
| Orange | SPV M1000, SPV M2000, SPV M3000 |
| Palm | Treo 650, Treo 700W, Treo 750v |
| Qtek | 9000, G100, S100, S110 |
| SonyEricsson | W950i |
| T-Mobile | MDA Compact, MDA Compact III, MDA III, MDA Pro |
TomTom has released map version 6.75 (Spring 2007) for Navigator 6
Please note:
- These maps can only be used if you already own TomTom products;
- If you want to download a map to your computer straight away, TomTom recommends using a broadband connection;
- Depending on the map you purchase, additional memory (e.g. an empty SD card) might be needed.
Buy a new map 2007 blicking on the follwing link.
NEW MAPS for Tomtom
Question
I get the message “No GPS Device” after installing NAVIGATOR 6 on my HP iPAQ 6510 or 6515. How do I select the internal GPS receiver in my iPAQ 6510 or 6515?
Answer
To select the GPS receiver that is in your HP iPAQ 6510 or 6515 for TomTom NAVIGATOR 6, do the following:
- Open the File Explorer and browse to the folder Navigator.
- Delete the file navigator.
- Start TomTom NAVIGATOR 6.
- When prompted, select Other NMEA GPS receiver.
- Set the GPS baud rate to 4800.
- Select Internal AGPS NMEA. ( Check your PDA or Device manual for this option always if you have a builtin GPS )
You have now selected the GPS receiver in your HP iPAQ 6510 or 6515 and can start using TomTom NAVIGATOR 6.
Your IP Address is:
38.107.179.230